Epson 6200L Reference Guide - Page 419

The printer does not print normally via the network interface. Cause What to do The Data Format setting, which is accessed by clicking Advanced on the PostScript sheet of the printer's Properties dialog box, is different from the data format setting specified in the application. If the file is created in an application that allows you to change the data format or encoding, such as Photoshop, make sure that the setting in the application matches that in the printer driver. The computer is connected to the network using AppleTalk in a Windows NT 4.0/2000 environment, and the Send CTRL+D Before Each Job or Send CTRL+D After Each Job setting on the Device Settings sheet of the printer's Properties dialog box is set to Yes. Make sure that both the Send CTRL+D Before Each Job and Send CTRL+D After Each Job settings are set to No. The network connection is something other than AppleTalk, and the Data Format setting is not set to ASCII data. If the network connection is something other than AppleTalk, make sure that the Data Format setting is set to ASCII data or Tagged binary communications protocol. The print data is too large. Click Advanced on the PostScript sheet of the printer's Properties dialog box, and then change the Data Format setting from ASCII data (default) to Tagged binary communications protocol. 11 11 11 11 11 11 11 11 11 11 11 11 Troubleshooting 419