Epson 6200L Reference Guide - Page 275
Standby, Timeout, Paper Size Ignore, Country ESCP2, FX only, CG Table ESCP2, Enable, Disable
View all Epson 6200L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 275 highlights
Standby Allows you to set the Standby mode to Enable (default) or 7 Disable. When Standby is enabled, the printer goes into sleep 7 mode if it is not used for 15 minutes. The printer begins warming up as soon as you send data, and is ready to print in about 16 seconds. When Standby is disabled, the printer stays warmed up and ready to print all the time. 7 Timeout 7 Allows you to set the length of time the printer waits before looking for the next print job. If the printer is online and receives no new data for the number of seconds specified, the printer 7 automatically switches to the next channel that receives data. You can set the timeout value in 1-second increments (the parameters are from 5 to 300). Paper Size Ignore 7 Allows you to select whether a paper size error is ignored when 7 it occurs. Turning this item on causes the printer to print even if the image size exceeds the printable area for the specified paper size. This may cause smudges, due to toner that is not transferred onto the paper properly. When this item is Off (default), the printer stops printing if a paper size error occurs. 7 Country (ESCP2, FX only) 7 Allows you to select the international character set. CG Table (ESCP2, FX only) 7 Allows you to select the character table. Character tables contain the characters and symbols used in different languages. The 7 printer prints the text based on the selected character table. 7 Using the Remote Control Panel Utility (EPL-6200 only) 275