Epson 6200L Reference Guide - Page 412

Problems printing PostScript documents The printer does not print correctly in the PostScript mode. Cause What to do The printer's emulation mode setting is incorrect. The printer is set to the Auto mode by default, so that it can automatically determine the encoding used in the received print job data and select the appropriate emulation mode. However, there are situations where the printer cannot select the correct emulation mode. In this case, it must be set manually to PS3. Use the Remote Control Panel utility to set the emulation mode. For details, see "Choosing printer emulation" on page 278. The printer's emulation mode setting for the interface that you are using is incorrect. The emulation mode can be set individually for each interface which receives print job data. Set the emulation mode for the interface you are using to PS3. 11 11 11 11 11 11 11 11 Set the emulation mode using the Remote Control Panel utility. For details, see "Choosing printer emulation" on page 278. 11 11 11 11 Troubleshooting 412