Epson 6200L Reference Guide - Page 286
Auto CR, Bit Image, With Bit Image set
View all Epson 6200L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 286 highlights
Note: 7 If you change the Orientation, Page Size, or T.Margin settings, the page length setting automatically returns to the default setting for each paper size. Auto CR 7 7 Allows you to use the automatic carriage return option to perform a carriage return line-feed (CR-LF) operation whenever the print position exceeds the right margin. If Auto CR is Off, the printer does not print characters beyond the right margin, and it does not perform a linewrap until it receives a CR. Most application 7 programs take care of this function. Auto LF 7 Allows you to specify the line feed setting. If you set AutoLF to 7 Off, the printer does not send an automatic line feed (LF) command with each carriage return (CR). When you set AutoLF to On, the printer adds a line feed to each carriage return it 7 receives. If your text lines overprint each other, set AutoLF to On. Bit Image With Bit Image set to Dark or Light, your printer can correctly 7 emulate the graphics densities set with the printer commands. If you select Dark, the bit image density is high. If you select Light, the bit image density is low. 7 With Bit Image set to BarCode, your printer converts bit images 7 to bar codes by automatically filling in any vertical gaps between dots. This produces unbroken vertical lines that can be read by a bar code reader. BarCode is not available in I239X mode. 7 This mode reduces the size of the image being printed and may cause some distortion when printing bit-image graphics. 7 Using the Remote Control Panel Utility (EPL-6200 only) 286