Epson 6200L Reference Guide - Page 295

Time Out Allows you to set the length of time the printer waits before 7 looking for the next print job. If the printer is online and receives 7 no new data for the number of seconds specified, the printer automatically switches to the next channel that receives data. You can set the timeout value in 1-second increments (the parameters are from 0 to 300). 7 Parallel I/F Buffer Size 7 Allows you to specify the amount of memory to be used for receiving and printing data through the parallel interface. If set to Maximum, more memory is allocated for receiving data. If set to Minimum, more memory is allocated for printing data. The factory default setting is Normal. 7 USB I/F Buffer Size 7 Allows you to specify the amount of memory to be used for receiving and printing data through the USB interface. If set to 7 Maximum, more memory is allocated for receiving data. If set to Minimum, more memory is allocated for printing data. The factory default setting is Normal. 7 AUX I/F Buffer Size 7 Allows you to specify the amount of memory to be used for receiving and printing data through the optional interface card. If set to Maximum, more memory is allocated for receiving data. If set to Minimum, more memory is allocated for printing data. The factory default setting is Normal. 7 7 7 Using the Remote Control Panel Utility (EPL-6200 only) 295