Epson 6200L Reference Guide - Page 315
Interface Cards, Removing a memory module
View all Epson 6200L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 315 highlights
Removing a memory module 8 To remove a memory module, perform the installation procedure in reverse. When you come to the step where you have to remove the module from the circuit board, see the instructions below: 8 Push the RAM slot (gray) release lever to release the memory 8 module, then grasp the module firmly on both ends and pull it out. 8 8 8 8 * 8 * Push here 8 Interface Cards 8 This section describes how to install an optional interface card into the Type B interface slot. 8 Note: Optional interface slot may not be available depending on the printer model. 8 Installing and Removing Options (EPL-6200 only) 315
Installing and Removing Options (EPL-6200 only)
315
8
8
8
8
8
8
8
8
8
8
8
8
Removing a memory module
To remove a memory module, perform the installation procedure
in reverse. When you come to the step where you have to remove
the module from the circuit board, see the instructions below:
Push the RAM slot (gray) release lever to release the memory
module, then grasp the module firmly on both ends and pull it
out.
* Push here
Interface Cards
This section describes how to install an optional interface card into
the Type B interface slot.
Note:
Optional interface slot may not be available depending on the printer
model.
*