Epson 6200L Reference Guide - Page 371

Developer Cartridge Memory Error 11 Developer Cartridge Memory Error 11 Control panel: Ready light on, Error light flashing A memory read/write error has occurred. Try reinstalling the developer cartridge or replacing the current cartridge with a new one by following the instructions under "Developer Cartridge" on page 319. If this still does not resolve the problem, turn the power off and then on again. Toner Out 11 11 11 Toner Out Control panel: Ready light on, Error light flashing The developer cartridge is out of toner. Replace the developer cartridge by following the instructions under "Developer Cartridge" on page 319. To clear this error and print a single sheet, press Continue on the EPSON Status Monitor 3 window that appears to clear the error. After that, this error will occur again until the developer cartridge is replaced. If you set the Toner Out Error setting to Off, you can continue printing even when this error occurs. 11 11 11 11 11 Front Cover Open 11 Front Cover Open 11 Troubleshooting 371