Epson LQ 1050 Technical Manual - Page 38
Control Panel
View all Epson LQ 1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
REV.-A 1.11.4 PGPNL Board (Control Panel) There are 11 LEDs, seven switches, and a buzzer on the control panel. Among these, seven LEDs and three switches are for the panel setting function (SelecType). Font, character pitch, and condensed mode can be selected directly using these switches. Settings set using the SelecType mode are stored in the memory and are set on the panel when the printer hardware is initialized. Normally, the SelecType function is valid when not printing. The printers have various other functions that can be selected from the control panel. Figure 1-16 shows the control panel. Figure 1-16. Control Panel Switches ON LINE This button controls the printer's on line/off line status. When the printer is on line, ON LINE light is on and the printer can receive and print data from the computer. When this lamp is flickering, the micro adjustment function can be used. FORM FEED When the printer is off line, press this button to eject a single sheet of paper or to advance continuous paper to the top of the next page. LINE FEED When the printer is off line, press this button to advance the paper one line, or hold it down to advance the paper continuously. 1-29