Panasonic WJHD500A WJHD500A User Guide - Page 11

&6 Electronic Zoom Button (EL-ZOOM) Use this button to enter or exit the electronic zoom mode. In the EL-ZOOM mode an image presently displayed in single spot can be enlarged and compressed on the Multiscreen Monitor. &7 Group Selection Button (GROUP SELECT) Selects the camera group from among group 1, 2, 3 and 4. The LED will light while any of the groups is selected. &8 Index Button (INDEX) Displays the all record list (list and thumbnail) or alarm and emergency list depending on the status of the ALARM SEARCH button. &9 Alarm Search Button (ALARM SEARCH) Selects either the list of alarm and emergency recordings or all recordings to be displayed on the Multiscreen Monitor. The LED indicates the status of selection as shown below. On: Search records for alarm and emergency recordings. Off: Search records for all recordings. Pressing this button in combination with the STOP button will reset the activated alarm. *0 Display Button (DISPLAY) Toggles the all title displays on the Multiscreen Monitor on and off, such as camera and group titles, operating status and so forth. Pressing this button will also display the record list with the search editing area to find the record to be played back. *1 Link Indicator (LINK) Is lit while the connection is established with the WJHD500A Disk Recorder. *2 Copy Button (COPY) Copies the selected images on to the DVD-RAM disk when the system is equipped the DVD Extension Unit. *3 Numeric Buttons (1 - 16) Use these buttons to select the desired camera number while recording and playing back. Entering the preset password with these buttons will release the button lock function. *4 Set Button (SET) Use this button to select multiple records in the list for coping to the DVD-RAM disk. *5 Increment/Decrement Button (+, -) Use these buttons to zoom in and out an image while the zoom mode is selected. 11 *6 Direction Buttons (C D A B) Use these buttons to select the desired area to be zoomed on the Multiscreen Monitor. C: Downward D: Upward A: Left B: Right *7 Stop Button (STOP) Stops playback. *8 Record Button (RECORD) Starts recording manually if applicable. The LED turns on to indicate that the recording mode is selected. *9 Playback/Pause Button (PLAY/PAUSE) Pressing this button will start playback. During playback, pressing this button will pause the playback. The LED indicates the status as shown below. On: Playback mode Blinking: Pause mode (0 JogDial Rotate in the pause mode to advance forward or reverse to the next recorded image. Rotating the dial also selects the record number when the recorded list is displayed on the monitor. (1 Shuttle Ring Rotate in the playback or the pause mode to search forward or reverse the recorded images at variable speed. (2 Recording Stop Button (REC STOP) Pressing this button will stop the recording. (3 Remote Port (REMOTE) Connect with the supplied modular cable to the WJHD500A Disk Recorder.