Panasonic WJHD500A WJHD500A User Guide - Page 5
Precautions
View all Panasonic WJHD500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
PRECAUTIONS • Refer all work related to the installation of this product to qualified service personnel or system installers. • Do not block the ventilation opening or slots on the cover. To prevent the appliance from overheating, place it at least 5 cm (2 inches) away from the wall. • Do not drop metallic parts through slots. This could permanently damage the appliance. Turn the power off immediately and contact qualified service personnel for service. • Do not attempt to disassemble the appliance. To prevent electric shock, do not remove screws or covers. There are no user-serviceable parts inside. Contact qualified service personnel for maintenance. • Handle the appliance with care. Do not strike or shake it, as this may damage the appliance. • Do not expose the appliance to water or moisture, nor try to operate it in wet areas. Take immediate action if the appliance becomes wet. Turn the power off and refer servicing to qualified service personnel. Moisture may damage the appliance and also cause electric shock. • Do not use strong or abrasive detergents when cleaning the appliance body. Use a dry cloth to clean the appliance when it is dirty. When the dirt is hard to remove, use a mild detergent and wipe gently. • Be sure to install the disk recorder horizontally. • Do not operate the appliance beyond its specified temperature, humidity or power source ratings. Use the appliance at temperatures within +5°C - +45°C (41°F - 113°F) and a humidity below 85 %. The input power source for this appliance is 120 V AC 60 Hz. • Fully charge up the backup battery. Keep the appliance turned on for at least 48 hours to recharge the backup battery. This procedure is necessary when using the appliance for the first time or after it has been unplugged for a long time from the AC outlet. Insufficient charging of the battery may cause erasure of settings if the AC power supply should fail. The battery, if fully charged, will back up the settings for 72 hours in an ordinary environment. 5