Panasonic WJHD500A WJHD500A User Guide - Page 87

• Set to ALM-MULTI • Records alarm images and creates thumbnails of images that have most recently received an alarm. • Records alarm images that is chosen detecting the rest of alarm duration every alarm inputs. • Records alarm images according to the REC RATE(BASE) in evenly until reaches REC RATE(MAX). Then the sum exceeds the maximum recording rate, it records images at maximum rate. Start Alarm 4 in Alarm 15 in Alarm 3 in C1 C2 ----- C16 C4 T Thumbnail T C4 C4 C4 C15 C4 C15 C4 C15 C4 C15 C3 C15 C3 C15 Thumbnail T Alarm 4 duration Thumbnail T Alarm 15 duration Thumbnail q Alarm Recording for Internal Timer Modes As described before, there are three recording modes for Timer Recording: Time Lapse, Multi Shot and One Shot Recording. Two of these, Multi Shot and One Shot recording, are event-recording functions reacting to an alarm input. Therefore, there is no difference compared to an alarm recording. The procedure described below is an example for alarm recording in the Time Lapse Recording mode. • Time Lapse Recording When the Time Lapse Recording mode is selected for Timer recording, it records the alarm-activated images in this mode with the specified recording rate, image quality and duration, as shown below. The recording pattern varies according to the setting of the Dynamic Recording parameter (DYNAMIC REC). (If the camera inputs 2, 4 and 5 are assigned to a group.) • Set to OFF Records the group input images in sequence starting with the lower number of the video input. Start Alarm 2 in C2 C4 C5 C2 C2 C4 C5 C2 C4 C5 C2 C4 C5 T Thumbnail T Thumbnail • Set to ALM-PRI Records the alarm-activated input images preferentially over other video inputs. Start Alarm 4 in Alarm 5 in C2 C4 C5 C2 C4 C2 C4 C4 C4 C5 C2 C4 C4 C5 C5 C4 C2 T Thumbnail T Thumbnail T Thumbnail • Set to ALM-ONLY Records the particular images that have activated the alarm. Start Alarm 2 in Alarm 5 in C2 C4 C5 C2 C2 C2 C2 C2 C2 C5 C5 C5 C5 T Thumbnail T Thumbnail T Thumbnail 90