Panasonic WJHD500A WJHD500A User Guide - Page 66
COMMUNICATION SETUP, Data Setup
View all Panasonic WJHD500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
COMMUNICATION SETUP The procedures described below let you set the parameters for the Disk Recorder to communicate with external devices. 1. Move the cursor to COMMUNICATION SETUP in the WJ-HD500 SETUP menu by pressing the C or D button, then press the SET button. The COMMUNICATION SETUP menu shown below appears on the monitor screen. 8 COMMUNICATION SETUP PS•Data SETUP RS232C SETUP NETWORK SETUP IP ADDRESS 192.168.000.010 NETMASK 255.255.255.000 GATEWAY 192.168.000.001 2. Select an item or item parameter in the menu by pressing the D or C button. 3. To return to the previous setup menu, press the SETUP/ESC button. q Unit Address Setting This item lets you set the unit address of the Disk Recorder in the system for RS-485 communication. 1. Move the cursor to the UNIT ADDRESS parameter by pressing the D or C button. 2. Select the unit address number to be used for RS-485 communication by pressing the + or - button. Select a parameter value between 001 and 099. The factory default setting is 001. 2. Select an item or item parameter in the menu by pressing the D or C button. 3. To return to the previous WJ-HD500 SETUP menu, press the SETUP/ESC button. s PS •Data Setup These items let you set the parameters for communication between the System Controllers and the Disk Recorders when the system is controlled with the PS •Data mode (Panasonic Security Data). 1. Move the cursor to PS •Data SETUP in the COMMUNICATION SETUP menu by pressing the C or D button, then press the SET button. The PS •Data SETUP menu shown below appears on the monitor screen. 8-1 PS•Data SETUP UNIT ADDRESS BAUD RATE DATA BIT PARITY CHECK STOP BIT WAIT TIME ALARM DATA 001 9600 8 NONE 1 OFF 1S CAMERA NUMBER SETUP q Baud Rate This item lets you set the transmission speed for RS-485 communication. 1. Move the cursor to the BAUD RATE parameter by pressing the D or C button. 2. Select the desired transmission speed shown below by pressing the + or - button. ↔ 2 400 ↔ 4 800 ↔ 9 600 ↔19 200 ↔ 38 400 ↔ The factory default setting is 9 600 bps. q Data Bit This item lets you set the number of data bits for RS-485 communication. The factory default setting is 8 bits and fixed. 68