Panasonic WJHD500A WJHD500A User Guide - Page 54

Emergency Recording (Time Lapse Recording) The Emergency Recording is given priority to record all video inputs in Time Lapse Recording reacting to a signal input form the CONTROL port. These items let you determine the recording parameters for Time Lapse Recording when the input signal is received from pin 21 of the CONTROL port located on the rear of the Disk Recorder. 1. Move the cursor to EMERGENCY in the WJ-HD500 SETUP menu by pressing the D or C button. 2. Select either audio recording function by pressing the + or - button, then press the SET button. The selected EMERGENCY REC SETUP menu shown below appears on the monitor screen. 4 EMERGENCY REC SETUP(WITHOUT AUDIO) EMERGENCY REC MODE REC RATE REC QUALITY DURATION SF- 24H 7.5FPS SUPER FINE 10S 3. Move the cursor to the EMERGENCY REC MODE parameter in the menu by pressing the D or C button, then select the desired recording time mode by pressing the + or - button. SF-✽✽H or SF-A*✽✽H: Selects the recording time mode in enhanced fine quality. FQ-✽✽H or FQ-A*✽✽H: Selects the recording time mode in fine quality. NQ-✽✽H or NQ-A*✽✽H: Selects the recording time mode in normal quality. EX-✽✽H or EX-A*✽✽H: Selects the recording time mode in extended time quality. SP or SP-A*: Freely selectable ✽✽ indicates the hours for recording time mode: 2, 12, 18, 24, 48, 72, 96, 120, 180, 240, 360, 480, 720, 960, 1200, 1440, 2160, 2880, 3600, 4320, 6480, 8640 (parameter A* indicates recording with audio) When the parameter SF/FQ/NQ/EX is selected for recording time, the recording rate and quality are automatically set according to the selected recording time. Note: It may not be possible to set the recording time, depending on the remaining storage capacity of the hard disk. The factory default setting is SF-24H. 56 4. If the parameter SP is selected for the recording time, move the cursor to the REC RATE parameter by pressing the D or C button, then select the desired recording rate by pressing the + or - button. 1 - 60FPS: Records the selected number of freeze images every second. 0.5FPS: Records a freeze image every 2 seconds. 0.4FPS: Records a freeze image every 2.5 seconds. 0.3FPS: Records a freeze image every 3.3 seconds. 0.2FPS: Records a freeze image every 5 seconds. 0.1FPS: Records a freeze image every 10 seconds. Notes: • The maximum recording rate depends on the selected parameters in the COMMON SETUP menu as shown in the table. FIELD/FRAME FIELD FRAME 3DIM ON FRAME 3DIM OFF CAMERA GENLOCK ON OFF ON OFF ON OFF REC RATE 60FPS 30FPS 10FPS 10FPS 30FPS 15FPS • "FPS" indicates as field per second or frame per second when the FIELD/FRAME parameter is set to FIELD or FRAME in the menu. Move the cursor to the REC QUALITY parameter by pressing the D or C button, then select a recording image quality by pressing the + or - button. SUPER FINE: For enhanced sharpness (Compression Rate 1/6) FINE: For fine image quality (Compression Rate 1/10) NORMAL: For normal image quality (Compression Rate 1/16) EXTENDED: For extended time recording quality (Compression Rate 1/25) 5. Move the cursor to the DURATION parameter by pressing the D or C button, then select the recording duration by pressing the + or - button. 2S - 6M: Enables recording for between 2 seconds and 6 minutes. MANUAL: Enables recording while the input signal is received from the CONTROL port. CONTINUE: Enables recording until the REC STOP button is pressed. The factory default setting is 10S. 6. Press the SETUP/ESC button to return to the previous WJ-HD500 SETUP menu.