Panasonic WJHD500A WJHD500A User Guide - Page 58
Power on Status Setup, Power on Setting Multiscreen, Monitor, Power on Setting Spot Monitor
View all Panasonic WJHD500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
6. Repeat the above steps 2 to 5 to set up the other steps. 7. When satisfied with all of the above steps, press the SETUP/ESC button to return to the previous SEQUENCE SETUP menu. q Sequence Timing Setting This item lets you select between internal and external control for advancing the sequence on the Spot Monitor. 1. Move the cursor to the SEQ TIMING parameter in the SEQUENCE SETUP menu by pressing the D or C button. 2. Select either INT or EXT by pressing the + or - button. INT: Advances a sequence by the Dwell Time that was programmed on the SPOT LIVE SEQUENCE SETUP. EXT: Advances a sequence by the input from pin 5 of the ALARM port. The factory default setting is INT. q Auto Skip Setting This item lets you enable or disable the auto skip function on the Spot Monitor to skip any steps when no video signal is present. 1. Move the cursor to the AUTO SKIP parameter in the SEQUENCE SETUP by pressing the D or C button. 2. Select either ON or OFF by pressing the + or - button. ON: Enables the auto skip function on the Spot Monitor. OFF: Disables the auto skip function on the Spot Monitor. The factory default setting is ON. Power on Status Setup The items let you select a pattern on the monitor screen when the Disk Recorder's power is turned on. s Power on Setting (Multiscreen Monitor) This item lets you select a display pattern on the Multiscreen Monitor when the Disk Recorder's power is turned on. 1. Move the cursor to the MULTI OUTPUT parameter in the MULTIPLEXER SETUP menu by pressing the D or C button. 2. Select a display pattern to be set by pressing the + or - button. 1 - 16: Selects an assigned camera image in single spot mode. SPOT SEQ: Selects a sequence pattern programmed in the Live Sequence (Spot Monitor). QUAD-4A to QUAD-4D: Selects an assigned quad display in spot mode. QUAD SEQ: Selects a sequence pattern programmed in the Live Sequence (Multiscreen Monitor). 7 to 16SCREEN: Selects a display with the assigned segment. The factory default setting is QUAD-4A. s Power on Setting (Spot Monitor) This item lets you select a display pattern on the Spot Monitor when the Disk Recorder's power is turned on. 1. Move the cursor to the SPOT OUTPUT parameter in the MULTIPLEXER SETUP menu by pressing the D or C button. 2. Select a display pattern to be set by pressing the + or - button. 1 - 16: Selects an assigned camera image in single spot mode. SPOT SEQ: Selects a sequence pattern programmed in the Live Sequence (Spot Monitor). The factory default setting is 1. 60