Panasonic WJHD500A WJHD500A User Guide - Page 84
Alarm Suspension, Alarm Reset, Manual Reset, Auto Reset, External Reset
View all Panasonic WJHD500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
s Alarm Reset q Manual Reset When the alarm is activated, the ALARM indicator blinks. The indicator keeps blinking until all alarms are cleared by pressing the ALARM RESET button. The blinking or lit indicator goes off. ALARM ALARM RESET q Auto Reset The alarm is automatically reset after the programmed alarm Auto Reset time has elapsed or the lost video signal has been recovered. The ALARM indicator changes from blinking to a steady light. Pressing the ALARM RESET button will clear the alarm and switch the indicator off. q External Reset The alarm is reset by a recovery signal received from the external equipment at pin 8 of the ALARM port located on the rear of the Disk Recorder. The ALARM indicator changes from blinking to a steady light. s Alarm Suspension This function disables the activation of the alarm link and instead enables storing of any alarm activated in the ERROR REPORT table. It is used to suspend the alarm link during the Disk Recorder's setup. To suspend the alarm: 1. Press the ALARM RESET and REC PREVIEW buttons at the same time. The ALARM SUSPEND indicator lights to indicate that this function is selected. ALARM SUSPEND ALARM RESET REC PREVIEW 2. Press the ALARM RESET button to reset the alarm suspension. The ALARM SUSPEND indicator goes off. ALARM SUSPEND ALARM RESET 87