Panasonic WJHD500A WJHD500A User Guide - Page 53

7. Move the cursor to the DYNAMIC REC parameter by pressing the D or C button, then select the recording pattern for post-recording by pressing the + or - button. OFF: Records the images assigned to group inputs, including the one that has activated the alarm (the same as pre-recording). ALM-ONLY: Records the particular image that has activated the alarm. The factory default setting is OFF. 8. Move the cursor to the AUTO COPY parameter by pressing the D or C button, then select alarm backup mode by pressing the + or - button. OFF: Disables alarm data backup. ON: Enables alarm data backup. The factory default setting is OFF. 9. Press the SETUP/ESC button to return to the previous program number menu. s One Shot Recording (Internal Timer) As described before, the One Shot Recording is an event recording function reacting to an alarm input. It records the number of particular images that have activated the alarm. These items let you determine the recording parameters for One Shot Recording assigned in the program number menu. (continued from Program Timer) 1. Select the recording mode O/S in the program number menu by pressing the + or - button, then press the SET button. The selected One Shot Recording menu as shown below appears on the monitor screen. 3-1-1-1 PROG1-NO1-G1 REC SETUP O/S(EVENT:ONE SHOT) TRIGGER ACTION REC+ALM REC MODE REC RATE REC QUALITY PICTURES 15FPS SUPER FINE 16 AUTO COPY OFF 2. Move the cursor to the TRIGGER ACTION parameter in the menu by pressing the D or C button, then select an active mode for group cameras when an alarm is received by pressing the + or - button. REC+ALM: Enables alarm recording and alarm activation. REC: Enables only alarm recording. The ALARM display on the monitor is also disabled. The factory default setting is REC+ALM. 3. Move the cursor to the REC RATE parameter in the menu by pressing the D or C button, then select the desired recording rate by pressing the + or - button. 1 - 60FPS: Records the selected number of the freeze image per second. The factory default setting is 15FPS. Notes: • The maximum recording rate depends on the selected parameters in the COMMON SETUP menu as shown in the table. FIELD/FRAME FIELD FRAME 3DIM ON FRAME 3DIM OFF CAMERA GENLOCK ON OFF ON OFF ON OFF REC RATE 60FPS 30FPS 10FPS 10FPS 30FPS 15FPS • "FPS" indicates as field per second or frame per second when the FIELD/FRAME parameter is set to FIELD or FRAME in the menu. 4. Move the cursor to the REC QUALITY parameter by pressing the D or C button, then select the desired image quality by pressing the + or - button. SUPER FINE: For enhanced sharpness (Compression Rate 1/6) FINE: For fine image quality (Compression Rate 1/10) NORMAL: For normal image quality (Compression Rate 1/16) EXTENDED: For extended time recording quality (Compression Rate 1/25) The factory default setting is SUPER FINE. 5. Move the cursor to the PICTURE parameter by pressing the D or C button, then select the number of freeze images to be recorded by pressing the + or - button. 4 to 60: Records the selected number of freeze images for One Shot Recording. The factory default setting is 16. 6. Move the cursor to the AUTO COPY parameter by pressing the D or C button, then select an alarm backup mode by pressing the + or - button. OFF: Disables backup for alarm recording. ON: Enables backup for alarm recording. The factory default setting is OFF. 7. Press the SETUP/ESC button to return to the previous program number menu. 55