Panasonic WJHD500A WJHD500A User Guide - Page 55

MULTIPLEXER SETUP These items let you determine functions such as sequence and power on status for this Disk Recorder. 1. Select MULTIPLEXER SETUP in the WJ-HD500 SETUP menu by pressing the D or C button, then press the SET button. The MULTIPLEXER SETUP menu as shown below appears on the monitor screen. 5 MULTIPLEXER SETUP SEQUENCE SETUP POWER ON MULTI OUTPUT SPOT OUTPUT SECRET VIEW QUAD-4A 1 OFF 2. Select an item or item parameter in the menu by pressing the D or C button. 3. To return to the WJ-HD500 SETUP menu, press the SETUP/ESC button. Sequence Setup These items let you program the sequence pattern for the Spot and Multiscreen Monitor. 1. Move the cursor to SEQUENCE SETUP in the MULTIPLEXER SETUP menu by pressing the D or C button, then press the SET button. The SEQUENCE SETUP menu as shown below appears on the monitor screen. 5-1 SEQUENCE SETUP MULTI LIVE SEQUENCE SETUP QUAD SHIFT OFF QUAD PATTERN SETUP SEQ TIMING INT GROUP SEQ MODE QUAD SEQ DWELL 2S AUTO SKIP ON SPOT LIVE SEQUENCE SETUP SEQ TIMING INT AUTO SKIP ON 2. Select an item or item parameter in the SEQUENCE SETUP menu by pressing the D or C button. 3. To return to the previous MULTIPLEXER SETUP menu, press the SETUP/ESC button. 57 s Sequence Setup (Multiscreen Monitor) There are three sequence patterns to run on the Multiscreen Monitor. The items shown below let you program the sequence to run on the Multiscreen Monitor. q Live Sequence Live sequence is a series of 16 steps assigned to the Multiscreen Monitor. The sequence steps can be combined with four screen segments (quad) display. q Live Sequence Pattern Setting 1. Move the cursor to MULTI LIVE SEQUENCE SETUP in the SEQUENCE SETUP menu by pressing the D or C button, then press the SET button. The menu shown below appears on the monitor screen. 5-1-1 MULTI LIVE SEQUENCE SETUP PRE- PRE- STEP CAM SET SEC STEP CAM SET SEC 1 4A 2 4B 3 4C 4 4D 5 -6 -7 -8 -- -- 2S 9 -- -- 0S -- 2S 10 -- -- 0S -- 2S 11 -- -- 0S -- 2S 12 -- -- 0S -- 0S 13 -- -- 0S -- 0S 14 -- -- 0S -- 0S 15 -- -- 0S -- 0S 16 -- -- 0S 2. Move the cursor to the step editing area by pressing the A, B, D or C button. 3. Select a camera to be displayed for CAM editing area by pressing the + or - button. 1 - 16: Displays the image of the selected camera number. 4A - 4D: Displays the assigned images in quad. Refer to the QUAD PATTERN SETUP for settings. --: Disables display and will skip automatically. 4. Move the cursor to the PRESET editing area by pressing the B button, then select a preset position to be displayed by pressing the + or - button, if applicable. 1 - 64: Selects a preset position of the assigned camera. --: No preset position The factory default setting is --.