Panasonic WJHD500A WJHD500A User Guide - Page 68

RS-232C Setup, Baud Rate, Data Bit, Parity Check, Unit Address Setting

Get Panasonic WJHD500A - Digital Disk Recorder PDF manuals and user guides View all Panasonic WJHD500A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

s RS-232C Setup These items let you set the parameters for communication between the SERIAL port of the Disk Recorder and an external device. 1. Move the cursor to RS232C SETUP in the COMMUNICATION SETUP menu by pressing the C or D button, then press the SET button. The RS232C SETUP menu shown below appears on the monitor screen. 8-2 RS232C SETUP UNIT ADDRESS BAUD RATE DATA BIT PARITY CHECK STOP BIT WAIT TIME 001 9600 7 ODD 1 OFF 2. Select an item parameter in the menu by pressing the D or C button. 3. To return to the previous setup menu, press the SETUP/ESC button. q Unit Address Setting This item lets you set the unit address of the Disk Recorder in the system. 1. Move the cursor to the UNIT ADDRESS parameter by pressing the D or C button. 2. Select the unit address number to be used for RS-232C communication by pressing the + or - button. Select a parameter value between 001 and 099. The factory default setting is 001. q Baud Rate This item lets you set the transmission speed for RS-232C communication. 1. Move the cursor to the BAUD RATE parameter by pressing the D or C button. 2. Select the desired transmission speed shown below by pressing the + or - button. ↔ 2 400 ↔ 4 800 ↔ 9 600 ↔19 200 ↔ 38 400 ↔ The factory default setting is 9 600 bps. q Data Bit This item lets you set the number of data bits for RS-232C communication. 1. Move the cursor to the DATA BIT parameter by pressing the D or C button. 2. Select either 7 or 8 for the number of data bits by pressing the + or - button. The factory default setting is 7 bits. q Parity Check This item lets you set the parity bit for RS-232C communication. 1. Move the cursor to the PARITY CHECK parameter by pressing the D or C button. 2. Select NONE, EVEN or ODD for parity check by pressing the + or - button. The factory default setting is ODD. 70

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
70
●
Baud Rate
This item lets you set the transmission speed for RS-232C
communication.
1. Move the cursor to the BAUD RATE parameter by
pressing the
D
or
C
button.
2. Select the desired transmission speed shown below by
pressing the
+
or
-
button.
The factory default setting is 9 600 bps.
●
Data Bit
This item lets you set the number of data bits for RS-232C
communication.
1. Move the cursor to the DATA BIT parameter by press-
ing the
D
or
C
button.
2.
Select either 7 or 8 for the number of data bits by press-
ing the
+
or
-
button.
The factory default setting is 7 bits.
●
Parity Check
This item lets you set the parity bit for RS-232C communica-
tion.
1. Move the cursor to the PARITY CHECK parameter by
pressing the
D
or
C
button.
2. Select NONE, EVEN or ODD for parity check by press-
ing the
+
or
-
button.
The factory default setting is ODD.
■
RS-232C Setup
These items let you set the parameters for communication
between the SERIAL port of the Disk Recorder and an
external device.
1. Move the cursor to RS232C SETUP in the COMMUNI-
CATION SETUP menu by pressing the
C
or
D
button,
then press the
SET
button.
The RS232C SETUP menu shown below appears on the
monitor screen.
2. Select an item parameter in the menu by pressing the
D
or
C
button.
3. To return to the previous setup menu, press the
SETUP/ESC
button.
●
Unit Address Setting
This item lets you set the unit address of the Disk Recorder
in the system.
1. Move the cursor to the UNIT ADDRESS parameter by
pressing the
D
or
C
button.
2.
Select the unit address number to be used for RS-232C
communication by pressing the
+
or
-
button.
Select a parameter value between 001 and 099.
The factory default setting is 001.
8-2 RS232C SETUP
UNIT ADDRESS
001
BAUD RATE
9600
DATA BIT
7
PARITY CHECK
ODD
STOP BIT
1
WAIT TIME
OFF
↔
2 400
↔
4 800
↔
9 600
↔
19 200
↔
38 400
↔