Pioneer AVIC-9DVD Owner's Manual - Page 23
Getting Started, Setup1: Getting Ready for the Remote Controller, Selecting dipswitches
View all Pioneer AVIC-9DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Chapter 1 Getting Started Getting Started 1 Chapter Setup 1: Getting Ready for the Remote Controller You generally use the Remote Controller to operate the Navigation System. Before using the Remote Controller, set the dipswitches and insert the batteries as described in the following sections. sSelecting dipswitches When you remove the battery cover of the Remote Controller, you will see the dipswitches as shown in the following illustration. You can set each dipswitch using the tip of a ballpoint pen. ON ON 1 2 34 OFF Setting Switch 1 Set Switch 1 depending on the display used. ON : This is set if turning this on is recommended for a display used with this unit. OFF : When the following Pioneer displays are used for navigation display: AVX-P7000CD, AVX-7000, AVD-W8000, AVD-W6000, AVD-W6010, AVX-7300, AVX-P7300DVD Setting Switch 2 This sets what equipment's volume is adjusted when you alter the VOL dial. ON : Volume of Pioneer Head Unit (including Pioneer AV master unit) is adjusted. OFF : Volume of the voice guidance of Navigation system is adjusted. Setting Switch 3 Set Switch 3 depending on the audio equipment used: ON : When combining with Pioneer AV master unit (AVM-P9000R, AVM-P8000R) OFF : When combining with Pioneer Head Unit with IP-BUS When combining with AVM-P7000R ➲ Switches 4 is not to be used (It does not matter whether it is ON or OFF.). ➲ Please set the switches correctly according to the combination of your equipment. Please make sure that the setting is correct, otherwise the Navigation System will not work properly. 21