Sharp AJ-6010 AJ6010 Operation Manual - Page 38
Scanning an Image - reset
View all Sharp AJ-6010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Scanning an Image Scanning Below is a step-by-step guide for acquiring a scanned image to the Sharpdesk desktop screen using Sharpdesk. It is assumed that the SHARP TWAIN driver has been installed without changing the default setting, and Sharpdesk is running. 1 Place a document on the original table. Reference: For information on setting a document for scanning, refer to "MAKING COPIES" in the Setup Guide and Operation Manual. 2 From Sharpdesk, select "Acquire Image" from the "File" menu, or click the "Acquire" button ( ). 5 Click the "Scanning" button ( ) after setting your preferences. 3 Click the "Preview" button ( ). The preview image will appear. If the rotation or angle of the image is different, reset the document, and click the "Preview" button again. 4 Specify the scanning area, and set the scan preferences. To specify the scanning area, follow the steps on the Preview Screen, or use the "Auto Scan Area Judgement" button ( ), or "Image Area". To set the scan preferences, use the four buttons displayed on the "Standard" screen. To set your scan preferences in detail, go to the "Professional" screen. To adjust the brightness and contrast of the scanned document, refer to Variation Preview Screen. Setting a large area with full colour together with a high resolution setting, makes the data size large, resulting in extended scanning times. It is recommended to set the scanning preferences depending on the type of original to be scanned, i.e., Text, Text/Graphics, Photograph, Colour, Black & White. After scanning, the image data will appear as a new file in Sharpdesk. 36