Sharp AJ-6010 AJ6010 Operation Manual - Page 74
Changing the Print Head
View all Sharp AJ-6010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Changing the Print Head (part 1) Maintenance If print quality is poor, after cleaning the print head 5 times, the print head may be worn. Ensure the unit is turned on before following the steps below on how to change the print head. 1 Turn the front cover locking knob with one hand and lift the front cover with the other hand, while keeping the knob in the unlocked position. The carriage will automatically move to the centre position. Reference: See "INSTALLING THE PRINT HEADS AND THE INK TANKS" in the Setup Guide and Operation Manual for more detail on how to open the front cover. 3 Raise the print head latch. Raise the latch until it comes to a complete halt. Raise this lever. Do not put your hands into the unit until the carriage stops at the centre position. Doing so may hurt your hands. Do not try to move the carriage manually by force, you may damage the unit. 2 Open the maintenance cover. 72