Sharp AJ-6010 AJ6010 Operation Manual - Page 72

Test Print Head

Get Sharp AJ-6010 PDF manuals and user guides View all Sharp AJ-6010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

Test Print Head Maintenance If you are not satisfied with the print quality, print a test page following the steps shown below. 1 Make sure that A4 sized paper is set in the tray. 2 Click the "Advanced" tab in the properties dialog box, and then click "Maintenance" button. 3 Click the "Start" button of "Test print head". 5 Check the result of the test page. If the print quality is poor, go to the next step. 6 Click the "Start" button of "Auto head cleaning" to clean the print heads. If you cannot get a good result printing a test page even after cleaning the print head five times, change the print head. Reference: Cleaning the Print Head 7 Change the print head. Replace the black print head if white lines appear in the black portion of your test page. If you find white lines in portions of colours except black, replace the colour print head. Reference: Changing the Print Head 4 Click the "OK" button. A test page will be printed. 70

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
Maintenance
70
Test Print Head
If you are not satisfied with the print quality, print a test page following the steps shown below.
1
Make sure that A4 sized paper is set in the tray.
2
Click the "Advanced" tab in the properties dialog
box, and then click "Maintenance" button.
3
Click the "Start" button of "Test print head".
4
Click the "OK" button.
A test page will be printed.
5
Check the result of the test page.
If the print quality is poor, go to the next step.
6
Click the "Start" button of "Auto head cleaning" to
clean the print heads.
If you cannot get a good result printing a test page even after
cleaning the print head five times, change the print head.
Reference:
Cleaning the Print Head
7
Change the print head.
Replace the black print head if white lines appear in the black
portion of your test page. If you find white lines in portions
of colours except black, replace the colour print head.
Reference:
Changing the Print Head