Canon CanoScan FS2700F User Manual - Page 109
Scan Resolution, Film Type, Exposure, Focus, Switches between the autofocus and manual
View all Canon CanoScan FS2700F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Copying with CanoCraft FS Copy Scan Resolution Select the [Scanning Resolution] option from the setup submenu. At installation, this setting is set to [Default Resolution]. High Resolution: scans at the printer's resolution setting. Default Resolution: scans at half the printer's resolution setting. Low Resolution: scans at one-third of the printer's resolution setting. Film Type Sets the type of film being scanned. • Please refer to the Selecting the Film Type topic for instructions on selecting the film type. (p. 29) Exposure Allows the manual adjustment of the exposure setting (scan speed) for film that has been intentionally over- or underexposed or that has an extremely bright or dark background. • Please refer to the Adjusting the Exposure Settings topic for instructions on adjusting the exposure setting. (p. 70) Focus Switches between the autofocus and manual focus settings for printing. While the autofocus setting is sufficient for standard films, warped or distorted films or those shot slightly out of focus may require manual adjustment. • Please refer to the Adjusting the Focus topic for instructions on adjusting the focus. (p. 72) • If the image remains blurred even after adjusting the focus manually, check the film to ascertain that it was shot in focus. 109