Canon S820D S820D Quick Start Guide - Page 47
Maintenance Procedures for Direct Printing
View all Canon S820D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Printing Without a Computer Maintenance Procedures for Direct Printing Printing a Nozzle Check Pattern You can print a nozzle check pattern by pressing the RESET button of the printer. Follow the steps below. 1. Make sure the printer is on. 2. Load letter paper. 3. Keep the RESET button pressed down, and release it when the power lamp blinks twice. To print a nozzle check pattern: 1. Make sure the printer is on. 2. Load letter paper. 3. Press the Maintenance button. The icon appears in Required Sheets. 4. Press the (right) button once. The icon appears. 5. Press the Print button. Nozzle check pattern is printed. When printing ends, the icon appears. 6. Press the Maintenance button to exit. 7. Compare the nozzle check patterns. • If the lines in the first pattern are broken, the printhead must be cleaned. See "Cleaning the Printhead" on page 41. • If the vertical lines in the second pattern stand out, the printhead position must be aligned. See "Aligning the Printhead" on page 49. 40