Canon S820D S820D Quick Start Guide - Page 83
Error, Number, Problem, Try
View all Canon S820D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Troubleshooting Error Number 401 402 611/612 802, 803, 809 - Problem Try This Front cover is open Close the front cover to start printing. Printhead is not attached Attach the printhead. If the printhead is attached, remove the printhead, make sure that the contact sections are clean, and then reattach the printhead. Time Out is activated during communication with the digital camera. OR A message, to the effect that the main unit does not support the digital camera, is sent Remove the connected cable to reset the error. Reconnect the cable to the digital camera, and then start printing. For instructions on printing from a digital camera, see the user's guide that comes with the digital camera. Error occurred in printer Press the Cancel button to stop printing, turn off the printer, wait awhile, and then turn on the power again. If the condition does not improve, contact the store where you bought the printer or a nearby repair center. Photo cannot be read from memory card (indicator lamp does not go on) Properly set a memory card that can be used. See "Using a Memory Card" on page 28. If a memory card is already set, eject the card, set it again, and check that the indicator lamp goes on. If the error is not corrected by the above procedure, turn off the printer, unplug the power cord, and then turn on the power again. 76