Casio EX-Z12 Owners Manual - Page 192

Specifying the File Name Serial Number Generation Rule Use the following procedure to specify the rule that governs generation of the serial number used in file names (page 180). 1. Press [MENU]. 2. On the "Set Up" tab, select "File No." and then press [X]. 3. Use [S] and [T] to select the setting you want and then press [SET]. To have the camera do this: Select this setting: Remember the numbers used for files. Files will be named using the next sequential number, even if files are deleted or if a blank memory card is loaded. • If a memory card is loaded that already has files stored on it and the largest sequential number in the existing file names is greater than the largest sequential number remembered by the camera, numbering of new files will start from the largest sequential number in the existing file names plus 1. Continue Restart the serial number from 0001 whenever all files are deleted or when the memory card is replaced with a blank one. • If a memory card is loaded that already has files stored on it, numbering of new files will start from the largest sequential number in the existing file names number plus 1. Reset 192 OTHER SETTINGS