D-Link DGS-1250 User Manual - Page 114

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide Click the Find button to locate a specific entry based on the information entered. Click the Show All button to view all the entries. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. The fields that can be configured or displayed for IGMP Snooping Groups Table are described below: Parameter VID Group Address FM Exp (sec) Description Click the radio button and enter a VLAN ID of the multicast group. The range is from 1 to 4094. Click the radio button and enter an IP multicast group address. Displays the filter mode. The following can be displayed: • EX (Exclude) - The filter mode is Exclude. • IN (Include) - The filter mode is Include. Displays the time left in seconds before the entry expires. Click the Find button to locate a specific entry based on the information entered. Click the Show All button to view all the entries. IGMP Snooping Mrouter Settings This window is used to display and configure the IGMP Snooping Mrouter settings. To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Mrouter Settings, as shown below: Figure 5-50 IGMP Snooping Mrouter Settings Window The fields that can be configured in IGMP Snooping Mrouter Settings are described below: Parameter VID Configuration From Port - To Port Description Enter the VLAN ID used here. The range is from 1 to 4094. Select the port configuration. Options to choose from are: • Port - Select to have the configured ports to be static multicast router ports. • Forbidden Port - Select to have the configured ports not to be multicast router ports. Select the appropriate port range used for the configuration here. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. 105