D-Link DGS-1250 User Manual - Page 263

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter TFTP Server IP Source File Destination File Description Select and enter the IP address of the TFTP server here. • IPv4 - Specifies to select and enter the IPv4 address of the TFTP server. • IPv6 - Specifies to select and enter the IPv6 address of the TFTP server. Enter the filename and path of the certificate and key file on the Switch here. This will be downloaded to the TFTP server. This field can be up to 64 characters long. Enter the filename and path of the certificate and key file that will be stored on the TFTP sever here. This field can be up to 64 characters long. Click the Backup button to initiate the certificate and key backup. Log Backup Log Backup to HTTP This window is used to initiate a system log backup to a local PC using HTTP. To view the following window, click Tools > Log Backup > Log Backup to HTTP, as shown below: Figure 13-14 Log Backup to HTTP Window The fields that can be configured are described below: Parameter Log Type Description Select the log type on the Switch that will be backed up to the local PC here. Options to choose from are System Log and Attack Log. Click the Backup button to initiate the system log backup. Log Backup to TFTP This window is used to initiate a system log backup to a TFTP server. To view the following window, click Tools > Log Backup > Log Backup to TFTP, as shown below: Figure 13-15 Log Backup to TFTP Window 254