D-Link DGS-1250 User Manual - Page 49
SNMP Group Table Settings, Management > SNMP > SNMP Group Table Settings
View all D-Link DGS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide SNMP Group Table Settings An SNMP group created with this table maps SNMP users to the views created in the SNMP View Table Settings window. To view the following window, click Management > SNMP > SNMP Group Table Settings, as shown below: Figure 4-7 SNMP Group Table Settings Window The fields that can be configured are described below: Parameter Group Name Read View Name User-based Security Model Write View Name Security Level Notify View Name IP Access-List Name Description Enter the SNMP group name here. This name can be up to 32 characters long. Spaces are not allowed. Enter the read view name that users of the group can access. Select the security model here. Options to choose from are: • SNMPv1 - Select to allow the group to use the SNMPv1 security model. • SNMPv2c - Select to allow the group to use the SNMPv2c security model. • SNMPv3 - Select to allow the group to use the SNMPv3 security model. Enter the write view name that the users of the group can access. When selecting SNMPv3 in the User-based Security Model drop-down list, this option is available. • NoAuthNoPriv - Specify that there will be no authorization and no encryption of packets sent between the Switch and a remote SNMP manager. • AuthNoPriv - Specify that authorization will be required, but there will be no encryption of packets sent between the Switch and a remote SNMP manager. • AuthPriv - Specify that authorization will be required, and that packets sent between the Switch and a remote SNMP manger will be encrypted. Enter the notify view name that users of the group can access. The notify view describes the object that can be reported its status via trap packets to the group user. Enter the standard IP access control list (ACL) to associate with the group. Click the Add button to add a new entry based on the information entered. Click the Delete button to remove the specified entry. 40