D-Link DGS-1250 User Manual - Page 58
DHCP, Service DHCP
View all D-Link DGS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Web Session Timeout Console Session Timeout Telnet Session Timeout SSH Session Timeout Description Enter the web session timeout value here. The range is from 60 to 36000 seconds. The default value is 180 seconds. Select the Default option to use the default value. Enter the console session timeout value here. The range is from 0 to 1439 minutes. Enter 0 to disable the timeout. The default value is 3 minutes. Select the Default option to use the default value. Enter the Telnet session timeout value here. The range is from 0 to 1439 minutes. Enter 0 to disable the timeout. The default value is 3 minutes. Select the Default option to use the default value. Enter the SSH session timeout value here. The range is from 0 to 1439 minutes. Enter 0 to disable the timeout. The default value is 3 minutes. Select the Default option to use the default value. Click the Apply button to accept the changes made. DHCP Service DHCP This window is used to display and configure the DHCP service on the Switch. To view the following window, click Management > DHCP > Service DHCP, as shown below: Figure 4-21 Service DHCP Window The fields that can be configured in Service DHCP are described below: Parameter Service DHCP State Description Select this option to enable or disable the DHCP service. Click the Apply button to accept the changes made. The fields that can be configured in Service IPv6 DHCP are described below: Parameter Service IPv6 DHCP State Description Select this option to enable or disable the IPv6 DHCP service. Click the Apply button to accept the changes made. 49