D-Link DGS-1250 User Manual - Page 26
Error Disable Settings, System > Port Configuration > Error Disable Settings
View all D-Link DGS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide Error Disable Settings This window is used to display and configure the recovery from the Error Disable causes and to configure the recovery interval. To view the following window, click System > Port Configuration > Error Disable Settings, as shown below: Figure 3-7 Error Disable Settings Window The fields that can be configured for Error Disable Trap Settings are described below: Parameter Asserted Cleared Notification Rate Description Specifies to enable or disable notifications for entering into the error-disabled state. Specifies to enable or disable notifications for exiting from the error-disabled state. Enter the notification rate value here. This sets the number of traps per minute. The packets that exceed the rate will be dropped. The range is from 0 to 1000. The default value (0) indicates that an SNMP trap will be generated for every change of the error disabled state. Click the Apply button to accept the changes made. The fields that can be configured for Error Disable Recovery Settings are described below: Parameter ErrDisable Cause State Interval Description Select the error disabled cause here. Options to choose from are Port Security, Storm Control, Dynamic ARP Inspection, DHCP Snooping, and Loopback Detect. Select to enable or disable the error disabled recovery feature here. Enter the time, in seconds, to recover the port from the error state caused by the specified module. The range is from 5 to 86400. Click the Apply button to accept the changes made. 17