D-Link DGS-1250 User Manual - Page 181
Ethernet Type Mask
View all D-Link DGS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Sequence No. Action Source Destination Specify Ethernet Type Ethernet Type Ethernet Type Mask CoS VID Time Range Description Enter the sequence number of this ACL rule here. The range is from 1 to 65535. If this value is not specified, the system will automatically generate an ACL rule number for this entry. Select the action that this rule will take here. Options to choose from are Permit and Deny. Select and enter the source MAC address information here. Options to choose from are Any, Host, MAC, and Wildcard. • When the Any option is selected, any source traffic will be evaluated according to the conditions of this rule. • When the Host option is selected, enter the source host MAC address here. • When the MAC option is selected, the Wildcard option will also be available. Enter the source MAC address and wildcard value in the spaces provided. Select and enter the destination MAC address information here. Options to choose from are Any, Host, MAC, and Wildcard. • When the Any option is selected, any destination traffic will be evaluated according to the conditions of this rule. • When the Host option is selected, enter the destination host MAC address here. • When the MAC option is selected, the Wildcard option will also be available. Enter the destination MAC address and wildcard value in the spaces provided. Select the Ethernet type option here. Options to choose from are aarp, appletalk, decent-iv, etype-6000, etype-8042, lat, lavc-sca, mop-console, mop-dump, vines-echo, vines-ip, xns-idp, and arp. Enter the Ethernet type hexadecimal value here. This value must be between 0x0 and 0xFFFF. When the Ethernet type profile is selected, above, the appropriate hexadecimal value will automatically be entered. Enter the Ethernet type mask hexadecimal value here. This value must be between 0x0 and 0xFFFF. When the Ethernet type profile is selected, above, the appropriate hexadecimal value will automatically be entered. Select the CoS value that will be used here. The range is from 0 to 7. Enter the VLAN ID that will be associated with this ACL rule here. The range is from 1 to 4094. Enter the name of the time range profile that will be used in this ACL rule here. This name can be up to 32 characters long. Click the Apply button to accept the changes made. Click the Back button to discard the changes made and return to the previous page. 172