D-Link DGS-1250 User Manual - Page 161
Policy Binding, New CoS, New Cos Queue, Apply, QoS > Advanced Settings > Policy Binding
View all D-Link DGS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide Parameter New CoS New Cos Queue Description selected, then both the IPv4 and IPv6 DSCP will be marked. Setting the DSCP will not affect the CoS queue selection. Select the new CoS value to packets here. The range is from 0 to 7. Setting the CoS will not affect the CoS queue selection. The CoS will only be marked. Select the new CoS queue value to packets here. This will overwrite the original CoS queue selection. Setting the CoS queue will take effect if the policy map is applied on the interface. Click the Back button to return to the previous window. Click the Apply button to accept the changes made. Policy Binding This window is used to display and configure the policy binding settings. To view the following window, click QoS > Advanced Settings > Policy Binding, as shown below: Figure 7-15 Policy Binding Window The fields that can be configured are described below: Parameter From Port - To Port Direction Policy Map Name Description Select the range of ports that will be used for this configuration here. Select the direction option here. Input specifies ingress traffic. Enter the policy map name here. This name can be up to 32 characters long. Select the None option to not tie a policy map to this entry. Click the Apply button to accept the changes made. 152