D-Link DGS-1250 User Manual - Page 52

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide SNMP Host Table Settings This window is used to display and configure the recipient of the SNMP notification. To view the following window, click Management > SNMP > SNMP Host Table Settings, as shown below: Figure 4-10 SNMP Host Table Settings Window The fields that can be configured are described below: Parameter Host IPv4 Address Host IPv6 Address User-based Security Model Security Level UDP Port Community String / SNMPv3 User Name Description Enter the IPv4 address of the SNMP notification host. Enter the IPv6 address of the SNMP notification host. Select the security model here. Options to choose from are: • SNMPv1 - Select to allow the group user to use the SNMPv1 security model. • SNMPv2c - Select to allow the group user to use the SNMPv2c security model. • SNMPv3 - Select to allow the group user to use the SNMPv3 security model. When selecting SNMPv3 in the User-based Security Model drop-down list, this option is available. • NoAuthNoPriv - Specify that there will be no authorization and no encryption of packets sent between the Switch and a remote SNMP manager. • AuthNoPriv - Specify that authorization will be required, but there will be no encryption of packets sent between the Switch and a remote SNMP manager. • AuthPriv - Specify that authorization will be required, and that packets sent between the Switch and a remote SNMP manger will be encrypted. Enter the UDP port number. The default trap UDP port number is 162. The range of UDP port numbers is from 1 to 65535. Some port numbers may conflict with other protocols. Enter the community string or SNMPv3 user name to be sent with the notification packet. Click the Add button to add a new entry based on the information entered. Click the Delete button to remove the specified entry. 43