D-Link DGS-1250 User Manual - Page 65
DHCP Local Relay VLAN Settings, Remote ID, Circuit ID, Value, Apply
View all D-Link DGS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide Parameter Type Value Description Select to use the Remote ID type or Circuit ID type here. Enter the vendor-defined string for Option 82 information in the remote/circuit ID sub-option here. This string can be up to 32 characters long. Click the Apply button to accept the changes made. DHCP Local Relay VLAN Settings This window is used to display and configure local relay on a VLAN or a group of VLANs. To view the following window, click Management > DHCP > DHCP Relay > DHCP Local Relay VLAN Settings, as shown below: Figure 4-32 DHCP Local Relay VLAN Settings Window The fields that can be configured are described below: Parameter DHCP Local Relay VID List State Description Enter the VLAN ID for DHCP local relay. Tick the All VLANs check box to select all VLANs. Select this option to enable or disable the DHCP local relay on the specific VLAN(s). Click the Apply button to accept the changes made. NOTE: When the state of the DHCP relay port is disabled, the port will not relay or locally relay received DHCP packets. 56