D-Link DGS-1250 User Manual - Page 198
RADIUS Group Server Settings, Security > RADIUS > RADIUS Group Server Settings
View all D-Link DGS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter IP Address IPv6 Address Authentication Port Retransmit Timeout Key Type Key Description Enter the RADIUS server IPv4 address here. Enter the RADIUS server IPv6 address here. Enter the authentication port number used here. This value must be between 0 and 65535. By default, this value is 1812. If no authentication is used, use the value 0. Enter the retransmit value used here. This value must be between 0 and 20. By default, this value is 2. To disable this option, enter the value 0. Enter the timeout value used here. This value must be between 1 and 255 seconds. By default, this value is 5 seconds. Specifies that the Plain Text key type is used. Enter the key, used to communicate with the RADIUS server, here. This key can be up to 32 characters long. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. RADIUS Group Server Settings This window is used to display and configure the RADIUS group server settings. To view the following window, click Security > RADIUS > RADIUS Group Server Settings, as shown below: Figure 9-22 RADIUS Group Server Settings Window The fields that can be configured are described below: Parameter Group Server Name IP Address IPv6 Address Description Enter the RADIUS group server name here. This name can be up to 32 characters long. Enter the group server IPv4 address here. Enter the group server IPv6 address here. Click the Add button to add a new entry based on the information entered. Click the Show Detail button to view and configure detailed settings for the RADIUS group server. Click the Delete button to remove the specified entry. 189