D-Link DGS-1250 User Manual - Page 230

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter ACL Name Type Description Enter the access class' name here. This name can be up to 32 characters long. Select the trusted host type here. Options to choose from are Telnet, SSH, Ping, HTTP, and HTTPS. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. Traffic Segmentation Settings This window is used to display and configure the traffic segmentation settings. When the traffic segmentation forwarding domain is specified, packets received by the port will be restricted in Layer 2 packet forwarding to interfaces within the domain. When the forwarding domain of a port is empty, Layer 2 forwarding for packets received by the port is not restricted. The traffic segmentation member list can be comprised of different interface types, for example port and port-channel in the same forwarding domain. If the interfaces specified by the command include a port-channel, all the member ports of this port-channel will be included in the forwarding domain. If the forwarding domain of an interface is empty, then there is no restriction on Layer 2 forwarding of packets received by the port. To view the following window, click Security > Traffic Segmentation Settings, as shown below: Figure 9-63 Traffic Segmentation Settings Window The fields that can be configured are described below: Parameter From Port - To Port From Forward Port ~ To Forward Port Description Select the receiving port range used for the configuration here. Select the forward port range used for the configuration here. Click the Add button to add a new entry based on the information entered. Click the Delete button to remove an entry based on the information entered. 221