D-Link DGS-1250 User Manual - Page 80
MAC Notification, L2 Features > FDB > MAC Notification
View all D-Link DGS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide MAC Notification This window is used to display and configure MAC notification. To view the following window, click L2 Features > FDB > MAC Notification, as shown below: Figure 5-5 MAC Notification (MAC Notification Settings) Window The fields that can be configured are described below: Parameter MAC Address Notification Interval History Size MAC Notification Trap State Trap Type From Port - To Port Added Trap Removed Trap Description Select to globally enable or disable the MAC notification function. Enter the time value between notifications. This value must be between 1 and 2147483647 seconds. By default, this value is 1 second. Enter the maximum number of entries listed in the history log used for notification. This value must be between 0 and 500. By default, this value is 1. Select to enable or disable the MAC notification trap state. Specifies the trap type. Options to choose from are Without VID and With VID. Select the range of ports that will be used for this configuration here. Select to enable or disable the added trap for the port(s) selected. Select to enable or disable the removed trap for the port(s) selected. Click the Apply button to accept the changes made for each individual section. 71