D-Link DGS-1250 User Manual - Page 203
DHCP Snooping Binding Entry
View all D-Link DGS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide The fields that can be configured in Store DHCP Snooping Database are described below: Parameter URL Description Specifies to store the DHCP snooping database on a TFTP server. Enter the URL in the space provided. Click the Apply button to accept the changes made. The fields that can be configured in Load DHCP Snooping Database are described below: Parameter URL Description Specifies to load the DHCP snooping database from a TFTP server. Enter the URL in the space provided. Click the Apply button to accept the changes made. Click the Clear button to clear all the counter information. DHCP Snooping Binding Entry This window is used to display and configure the DHCP snooping binding entries. To view the following window, click Security > IMPB > IPv4 > DHCPv4 Snooping > DHCP Snooping Binding Entry, as shown below: Figure 9-29 DHCP Snooping Binding Entry Window The fields that can be configured are described below: Parameter MAC Address VID IP Address Port Expiry Description Enter the MAC address of the DHCP snooping binding entry here. Enter the VLAN ID of the DHCP snooping binding entry here. This value must be between 1 and 4094. Enter the IP address of the DHCP snooping binding entry here. Select the appropriate port used for the configuration here. Enter the expiry time value used here. This value must be between 60 and 4294967295 seconds. Click the Add button to add a new entry based on the information entered. Click the Delete button to remove the specified entry. 194