D-Link DGS-1250 User Manual - Page 266
Reset, Reboot System, Language File, Browse, Apply, Tools > Reset, Tools > Reboot System, Reboot
View all D-Link DGS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 266 highlights
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Language File Description Click the Browse button and navigate to the language pack file on the local PC here. This file will be uploaded to the Switch. Click the Apply button to initiate the language pack upload and installation. Reset This window is used to reset the Switch's configuration to the factory default settings. To view the following window, click Tools > Reset, as shown below: Figure 13-19 Reset Window Select one of the following options: • The Switch will reset to its factory default settings and then save, reboot. • The Switch will reset to its factory default settings and then save, reboot. This option excludes the IP address. • The Switch will reset to its factory default settings and not reboot. Click the Apply button to initiate the reset. Reboot System This window is used to reboot the Switch and alternatively save the configuration before doing so. To view the following window, click Tools > Reboot System, as shown below: Figure 13-20 Reboot System Window When rebooting the Switch, any configuration changes that was made during this session, will be lost unless the Yes option is selected when asked to save the settings. Click the Reboot button to alternatively save the settings and reboot the Switch. 257