D-Link DGS-1250 User Manual - Page 228

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Sub Interface Protocol Name Description Select the sub-interface option here. Options to choose from are Manage, Protocol, Route, and All. This option specifies to clear the CPU protect related counters of sub-interfaces. Select the protocol name option here. Click the Clear button to clear the information based on the selections made. Click the Clear All button to clear all the information in this table. CPU Protect Sub-Interface This window is used to display and configure the CPU protection sub-interface settings. To view the following window, click Security > Safeguard Engine > CPU Protect Sub-Interface, as shown below: Figure 9-60 CPU Protect Sub-Interface Window The fields that can be configured in CPU Protect Sub-Interface are described below: Parameter Sub-Interface Rate Limit Description Select the sub-interface option here. Options to choose from are Manage, Protocol, and Route. Enter the rate limit value used here. This value must be between 0 and 1024 packets per second. Tick the No Limit option to disable the rate limit. Click the Apply button to accept the changes made. The fields that can be configured in Sub-Interface Information are described below: Parameter Sub-Interface Description Select the sub-interface option here. Options to choose from are Manage, Protocol, and Route. Click the Find button to locate a specific entry based on the information entered. 219