D-Link DGS-1250 User Manual - Page 231
Storm Control Settings, Security > Storm Control Settings
View all D-Link DGS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide Storm Control Settings This window is used to display and configure the storm control settings. To view the following window, click Security > Storm Control Settings, as shown below: Figure 9-64 Storm Control Settings Window The fields that can be configured in Storm Control Trap Settings are described below: Parameter Trap State Description Select the storm control trap option here. Options to choose from are: • None - Specifies that no traps will be sent. • Storm Occur - Specifies that a trap notification is sent when a storm event is detected. • Storm Clear - Specifies that a trap notification is sent when a storm event is cleared. • Both - Specifies that a trap notification is sent when a storm event is detected and/or cleared. Click the Apply button to accept the changes made. The fields that can be configured in Storm Control Polling Settings are described below: Parameter Polling Interval Shutdown Retries Description Enter the interval value used here. This value must be between 5 and 600 seconds. By default, this value is 5 seconds. Enter the shutdown retries value used here. This value must be between 0 and 360. By default, this value is 3. Tick the Infinite option to disable this feature. Click the Apply button to accept the changes made. The fields that can be configured in Storm Control Port Settings are described below: Parameter From Port - To Port Description Select the appropriate port range used for the configuration here. 222