D-Link DGS-1250 User Manual - Page 177
Standard IPv6 ACL, IP Precedence
View all D-Link DGS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide Parameter IP Precedence ToS DSCP Time Range Description This parameter is only available in the protocol type TCP. Select the IP precedence value used here. Options to choose from are routine (0), priority (1), immediate (2), flash (3), flash-override (4), critical (5), internet (6), and network (7). • Value - The IP precedence value can also manually be entered here. The range is from 0 to 7. Select the Type-of-Service (ToS) value that will be used here. Options to choose from are normal (0), min-monetary-cost (1), max-reliability (2), maxthroughput (4), and min-delay (8). • Value - The ToS value can also manually be entered here. The range is from 0 to 15. Select the DSCP value that will be used here. Options to choose from are default (0), af11 (10), af12 (12), af13 (14), af21 (18), af22 (20), af23 (22), af31 (26), af32 (28), af33 (30), af41 (34), af42 (36), af43 (38), cs1 (8), cs2 (16), cs3 (24), cs4 (32), cs5 (40), cs6 (48), cs7 (56), and ef (46). • Value - The DSCP value can also manually be entered here. The range is from 0 to 63. Enter the name of the time range profile that will be used in this ACL rule here. This name can be up to 32 characters long. Click the Apply button to accept the changes made. Click the Back button to discard the changes made and return to the previous page. Standard IPv6 ACL After selecting a Standard IPv6 ACL and clicking the Add Rule button, the following page will appear. Figure 8-13 Standard IPv6 ACL (Add Rule) Window The fields that can be configured are described below: Parameter Sequence No. Action Source Description Enter the sequence number of this ACL rule here. The range is from 1 to 65535. If this value is not specified, the system will automatically generate an ACL rule number for this entry. Select the action that this rule will take here. Options to choose from are Permit and Deny. Select and enter the source IPv6 information here. Options to choose from are Any, Host, IPv6, and Prefix Length. 168