D-Link DGS-1250 User Manual - Page 36

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide Click the Delete button to delete the specified entry. System Log Server Settings This window is used to display and configure the system log server settings. To view the following window, click System > System Log > System Log Server Settings, as shown below: Figure 3-20 System Log Server Settings Window The fields that can be configured are described below: Parameter Host IPv4 Address Host IPv6 Address UDP Port Severity Facility Description Enter the system log server IPv4 address here. Enter the system log server IPv6 address here. Enter the system log server UDP port number here. This value must be either 514 or between 1024 and 65535. By default, this value is 514. Select the severity value of the type of information that will be logged. Options to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging). Select the facility number that will be logged here. The range is from 0 to 23. Each facility number is associated with a specific facility. See the table below: Facility Number Facility Name Facility Description 0 kern Kernel messages 1 user User-level messages 2 mail Mail system 3 daemon System daemons 4 auth1 Security/authorization messages 5 syslog Messages generated internally by the SYSLOG 6 lpr Line printer sub-system 7 news Network news sub-system 8 uucp UUCP sub-system 9 clock1 Clock daemon 10 auth2 Security/authorization messages 11 ftp FTP daemon 12 ntp NTP subsystem 13 logaudit Log audit 27