D-Link DGS-1250 User Manual - Page 23
Port Configuration, Port Settings
View all D-Link DGS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide Click the Apply button to accept the changes made. The fields that can be configured in Environment Temperature Threshold Settings are described below: Parameter High Threshold Low Threshold Description Enter the high threshold value of the warning temperature setting. The range is from -100 to 200 degrees Celsius. Tick the Default check box to return to the default value. Enter the low threshold value of the warning temperature setting. The range is from -100 to 200 degrees Celsius. Tick the Default check box to return to the default value. Click the Apply button to accept the changes made. Port Configuration Port Settings This window is used to display and configure the Switch's port settings. To view the following window, click System > Port Configuration > Port Settings, as shown below: Figure 3-4 Port Settings Window The fields that can be configured are described below: Parameter From Port - To Port State MDIX Description Select the appropriate port range used for the configuration here. Select to enable or disable the physical port state here. Select the Medium Dependent Interface Crossover (MDIX) option here. Options to choose from are: • Auto - Select this option for auto-sensing of the optimal type of cabling. • Normal - Select this option for normal cabling. If this option is selected, the port is in the MDIX mode and can be connected to a PC NIC using a straight-through cable or a port (in the MDI mode) on another Switch through a crossover cable. 14