D-Link DGS-1250 User Manual - Page 145
IPv4 Route Table, IPv6 Static/Default Route, L3 Features > IPv4 Route Table, IP Address
View all D-Link DGS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide IPv4 Route Table This window is used to display and configure the IPv4 route table settings. To view the following window, click L3 Features > IPv4 Route Table, as shown below: Figure 6-16 IPv4 Route Table Window The fields that can be configured are described below: Parameter IP Address Network Address Connected Hardware Summary Description Select and enter the single IPv4 address here. Select and enter the IPv4 network address here. In the first space enter the network prefix and in the second space enter the network mask. Select this option to display only connected routes. Select this option to display only hardware routes. Hardware routes are routes that have been written into the hardware chip. Select this option to display a summary and count of the route sources configured on this Switch. Click the Find button to locate a specific entry based on the information entered. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. IPv6 Static/Default Route This window is used to display and configure the IPv6 static or default routes. To view the following window, click L3 Features > IPv6 Static/Default Route, as shown below: Figure 6-17 IPv6 Static/Default Route Window 136