D-Link DGS-1250 User Manual - Page 59
DHCP Class Settings, Management > DHCP > DHCP Class Settings, Class Name, Apply, Delete, Option
View all D-Link DGS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide DHCP Class Settings This window is used to display and configure the DHCP class and the DHCP option matching pattern for the DHCP class. To view the following window, click Management > DHCP > DHCP Class Settings, as shown below: Figure 4-22 DHCP Class Settings Window The fields that can be configured are described below: Parameter Class Name Description Enter the DHCP class name with a maximum of 32 characters. Click the Apply button to accept the changes made. Click the Edit button to modify the DHCP option matching pattern for the corresponding DCHP class. Click the Delete button to remove the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Edit button, the following window will appear. Figure 4-23 DHCP Class Settings (Edit) Window The fields that can be configured are described below: Parameter Option Hex Bitmask Description Enter the DHCP option number. The range is from 1 to 254. Enter the hex pattern of the specified DHCP option. Tick the * check box not to match the remaining bits of the option. Enter the hex bit mask for masking of the pattern. The masked pattern bits will be matched. If not specified, all bits entered in the Hex field will be checked. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. Click the Back button to return to the previous window. 50