D-Link DGS-1250 User Manual - Page 254
Hibernation, Time Range, Apply, Delete, Power Saving Shutdown Settings, From Port - To Port
View all D-Link DGS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 254 highlights
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide Parameter Time Range Description • Hibernation - Specifies to add or delete a time range profile for the system hibernation schedule. When the system enters the hibernation mode, the Switch goes into a low powered state and idle. It shuts down all the ports and LEDs, all network functions is disabled, and only the console connection works through the RS232 port. If the Switch is an endpoint PSE, power is not provided through the ports. Enter the name of the time range to associate with the power saving type. Click the Apply button to accept the changes made for each individual section. Click the Delete button to remove the specified entry. After clicking the Power Saving Shutdown Settings tab, the following page will appear. Figure 12-2 Power Saving Shutdown Settings Window The fields that can be configured are described below: Parameter From Port - To Port Time Range Description Select the appropriate port range used for the configuration here. Enter the name of the time range to associate with the ports. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. 245