D-Link DGS-1250 User Manual - Page 160
Class Rules, Policy Map, Set Action, Delete, Specify, New Precedence, IPv4 only, New DSCP
View all D-Link DGS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide To view the Class Rules assigned to a Policy, select the Policy Map entry in the Policy Map table. The class rules assigned to the Policy will be displayed in the Class Rules table, as shown below: Figure 7-13 Policy Map (Class Rules) Window Click the Set Action button to configure the set action settings for the specified entry. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Set Action button, the following page will appear. Figure 7-14 Policy Map (Set Action) Window The fields that can be configured are described below: Parameter None Specify New Precedence New DSCP Description Select this option to specify that no action will be taken. Select this option to specify that action will be taken based on the configurations made. Select the new precedence value for the packet here. The range is from 0 to 7. Select the IPv4 only option to specify that IPv4 precedence will be marked only. If not selected, then both IPv4 and IPv6 precedence will be marked. For IPv6 packets, the precedence is the most three significant bits of the traffic class of the IPv6 header. Setting the precedence will not affect the CoS queue selection. Select the new DSCP value for the packet here. The range is from 0 to 63. Select the IPv4 only option to specify that the IPv4 DSCP will be marked only. If not 151