D-Link DGS-1250 User Manual - Page 30
PoE Status, PoE Configuration, System > PoE > PoE Status, From Port - To Port, Description
View all D-Link DGS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide PoE Status This window is used to configure the description and display the PoE status of each port. To view the following window, click System > PoE > PoE Status, as shown below: Figure 3-12 PoE Status Window The fields that can be configured for PoE Status are described below: Parameter From Port - To Port Description Description Select the appropriate port range used for the configuration here. Enter the text that describes the PD connected to a PoE interface. The maximum length is 32 characters. Click the Apply button to accept the changes made. Click the Delete Description button to remove the description from the entry. PoE Configuration This window is used to display and configure the PoE configuration settings. NOTE: If the Switch failed to supply power to the IEEE 802.3at PD, • Check if the PD connected to the port supports the IEEE 802.3at standard • Manually configure the PoE power limit value to 30 Watts for the corresponding port 21